Xtreme Charge QuadLink 8-Station Battery Charger Kit

Xtreme Charge QuadLink 8-Station Battery Charger Kit
Part #: 100X206 Model #: X2-QL4-K2
The 8-Station QuadLink Charger Kit includes an Xtreme 2-Station 12V Battery Charger, (2) QuadLink multipliers, a 12V battery tester, (10) 2' battery leads with lugs, (2) 2' battery lead with clips, (8) 5' extension leads and (4) 25' extension leads - everything you need to charge, maintain and desulfate EIGHT individual 12V (VRLA, AGM and flooded cell) batteries or up to FOUR 24V commercial systems composed of two 12V batteries connected in series. That's a $175 savings off buying the products individually!

TEST AND MAINTAIN UP TO EIGHT BATTERIES AT A TIME!

This innovative, new charge and battery maintenance system maintains and desulfates up to eight 12-Volt lead-acid batteries, including VRLA, AGM and flooded cell. It’s easy to assemble and use utilizing PulseTech’s plug and play technology. Set up takes just a few minutes and this state-of-the-art kit automatically knows what to do so you don’t have to be a battery expert to use it. Unlike other smart chargers on the market, you don’t need to select the battery type or the proper charge rate for the battery to avoid the risk of unsafe or improper charging.

There’s no guess work because the fuse-protected, spark-proof X2 works on any type of 12-Volt lead-acid battery – VRLA, AGM and flooded. Proprietary algorithms combined with microprocessor controlled technology measure the battery’s voltage and current to automatically determine and deliver the precise charge rate based on the size and condition of the individual battery, both initially and continuously throughout the five-stage charge process.

The QuadLink (XC-QL4) acts as a multiplier so the capabilities of the charger are passed through to the batteries via the QuadLink. The battery charger is always in full control of the charging process. Utilizing a simple plug and play system QuadLink splits and distributes 10-minute charge segments sequentially from battery to battery, making remembering to switch your battery charger back and forth between batteries in storage obsolete. Cycle rotation will continue indefinitely without overcharging – maintaining the charge of up to eight batteries for you automatically. For best results, batteries should start off in a fully charged state.  If you only want to charge less than eight batteries the QuadLink multiplier will recognize this and skip any open channels after a circuit verification test. The station or battery that is currently being charged is indicated by a blinking LED light on the QuadLink.

By combining the distribution power of two QuadLinks with the X2 you are able to keep up to EIGHT 12V batteries in optimum condition. During the X2’s maintenance cycle, PulseTech’s patented, optimized frequency pulsing constantly works to minimize and reduce naturally occurring battery sulfation – the main cause of battery failures. By reducing the size and number of lead sulfate deposits on the battery plates that negatively affect your battery’s ability to accept, store and release energy, your batteries will charge deeper, maintain greater reserve capacity and last longer – up to five times longer.
The XC-822-TEST 12-Volt battery tester is pocket-sized so it’s small enough to carry with you and have available when needed. This tester instantly shows an indication of your 12-Volt lead-acid battery’s state of charge at 100%, 75%, 50% or 25%. It also provides a quick GOOD or BAD alternator test result. The dual design allows you to insert the test probes directly into the standard quick disconnect connection without touching the battery posts or to remove the probes and touch the battery terminals directly. It’s the perfect tester to determine if a battery needs to be charged before being attached to the QuadLink Charger Kit.

The X2-QL4-K2 has the ability to charge as many as EIGHT individual 12V batteries, or up to FOUR 24V commercial systems composed of two 12V batteries connected in series or 12V batteries in 36 and 48V series connected configurations. This versatile kit has both consumer and commercial applications allowing you to charge multiple batteries at once saving you both time and money.

The quick disconnect feature allows you to permanently attach lugs to the battery and easily switch between lugs and clamps. The status light column shows you when the unit power is on, pulsing and charging. The battery light column indicates the percentage of the battery’s state of charge – 25%, 50%, 75% or 100%.
•    Charge and maintain up to EIGHT 12-Volt lead-acid VRLA, AGM and flooded batteries
•    Desulfate batteries so they accept, store & release maximum power
•    Extend battery life up to 5 times
•    Enables charging of 12V batteries in 24V, 36V and 48V series configurations
•    Charging sequence continues indefinitely without risk of overcharging or overheating
•    Eliminates the need for using 8 separate chargers
•    LEDs indicate charging, pulsing and battery state of charge
•    Fully-automatic microprocessor controlled technology
•    Reverse battery protection and indication
•    Sparkless operation
•    5-Year Limited Warranty

Kit Contains:
(2) 4-Station Charger Multiplier, XC-QL4
(1) Xtreme 2-Station 12V Maintenance Charger, X2
(1) Battery Tester, XC-822-TEST
(10) 2’Battery Leads with Lugs, XC-LUGS
(2) 2’ Battery Lead with Clips, XC-CLIPS
(8) 5’ Battery Extension Leads, XC-EXT-5
(4) 25’ Battery Extension Leads, XC-EXT-25

Model Name: Xtreme Charge 2-Station Battery Charger
Model Number: X2
Part Number: 100X200

Electrical Characteristics
Input Electrical
Input Voltage: 100 – 250 VAC
Input Current: 0.6 Amps Maximum
Input Frequency: 50 – 60 Hz
Minimum Battery Voltage for Charger Startup: ≥ 7 VDC
Output Electrical
Output Current: 2.5 Amps DC Maximum Per Station
Output Voltage, Bulk Charge: 14.8 VDC
Absorption to Float Charge Threshold: Battery Voltage = 14.2V Under Charge and Charge Current < 0.75 Amps DC Desulfating Pulse Peak Amplitude: 250mA Typical Per Station Desulfating Pulse Frequency: 22kHz to 28kHz Pulse Rise Time: < 1 microsecond Mechanical / Physical Characteristics
Dimensions: 7.9” L x 6.3” W x 2.40” H
Weight: 2.73 lbs.
Shipping Weight: 3.93 lbs.
Enclosure: ABS Plastic Rated 94-V0
Power Cord Length: 6 ft.
Main Battery Cable Length: 6 ft.
Lug/Clamp Cable Length: 2 ft.

Environmental
Operating Temperature: 0 F to 130 F (0 C to 54 C)
Storage Temperature: 0 F to 150  F (-18 C to 66  C)

Indicators, Per Station
Power On No Connection
Bad Battery Pulsing
Charging Test
Battery State of Charge: 25%, 50%, 75%, 100%.

Safety & Compliance
UL Listed

Model Name: QuadLink Charger/Multiplier
Model Number: XC-QL4
Part Number: 100X004

Electrical Characteristics
Input Electrical
Input Voltage: 4 VDC to 18 VDC
Input Current: 8 Amp Maximum
Min. Voltage for Startup: 4 VDC

Output Electrical
Output Current: 8 Amps Maximum
Output Voltage, Bulk Charge: Dependent upon Connected Battery Charger
Absorption to Float Charge Threshold: Dependent upon Connected Battery Charger

Mechanical/Physical Characteristics
Shipping Dimensions: 10.” x 9.” x 3.”
Shipping Weight: 2.5 lbs.
Battery Cable Length: 5 ft.
Lug/Clamp Cable Length: 2 ft.

Environmental
Operating Temperature: 0 F to 130 F (-18 C to 54 C)
Storage Temperature: 0 F to 150 F (-18 C to 66 C)

Indicators
Connected
Charging